Tape mounting and tape

Punched tape used for the installation of ventilation systems, pipes and ducts that can reliably capture the essential elements of the design. Also the tape is suitable for mounting and coupling of any design currently under construction on industrial and residential purposes, which can significantly increase the carrying capacity of the mount.

The entire length of the strip is provided with holes of different diameters that allow you to choose the most rational method of attachment.

Description: is a strip of galvanized steel of a certain width and thickness with holes of different diameter. The zinc coating provides protection infopolicy metal from corrosion and rust. To the surface of the wooden structural elements of the paper tape is mounted with nails, screws, screws. Mount tape to the surface of walls made of concrete, bricks, blocks, carried out by means of dowel-nails.


Depending on the destination tape is:

  • Video for hanging cable lines or pipelines with negligible weight.
  • Wavy as a clamp for fastening of air ducts and pipelines.

The versatility of perforated tape that you can mount it using any fasteners - screws, screws, nails or bolts.

The benefits of using galvanized tape:

  • high reliability and durability of the flexible duct;
  • high stiffness and load-bearing capacity of elements of systems of ventilation and conditioning;
  • allows you to keep the original mechanical stability of the structure;
  • quick and easy duct installation in congested areas
  • installation of ducts with a hand tool without special equipment;
  • durability — the life of at least 10 years when used in accordance with the requirements of the standards;
  • <li>the limit tensile strength not less than 100 MPa (permissible value) and magnitude of effort of at least 1 kN, in which the deformation of perforated holes;
  • low installation costs.


Perforated tape

Punched tape "Wave" 12 mm

The height of the tape: 12 mm
The thickness of the metal Tape length in roll
0.5 mm 5 m
0.5 mm 10 m
0.5 mm 20 m
0.6 mm 5 m
0.6 mm 10 m
0.6 mm 20 m
0.7 mm 10 m
0.7 mm 20 m

The paper tape 12 mm

The height of the tape: 12 mm
The thickness of the metal Tape length in roll
0.5 mm 5 m
0.5 mm 10 m
0.5 mm 20 m
0.6 mm 5 m
0.6 mm 10 m
0.6 mm 20 m
0.7 mm 10 m
0.7 mm 20 m

The paper tape 18 mm

The height of the tape: 12 mm
The thickness of the metal Tape length in roll
0.5 mm 5 m
0.5 mm 10 m
0.5 mm 20 m
0.6 mm 5 m
0.6 mm 10 m
0.6 mm 20 m
0.7 mm 10 m
0.7 mm 20 m

The paper tape 25 mm

The height of the tape: 12 mm
The thickness of the metal Tape length in roll
0.5 mm 5 m
0.5 mm 10 m
0.5 mm 20 m
0.6 mm 5 m
0.6 mm 10 m
0.6 mm 20 m
0.7 mm 10 m
0.7 mm 20 m

Please notethat the PC "industry" is a manufacturer of perforated tape. Minimum amount of order on the tape is 1 km away.

The implementation of smaller volumes is carried out through our dealers and representatives in all regions of Ukraine. To clarify the numbers in your region from our employees:

Head of mounting tape and tape - Grinenko Julia:

mob.tel. +38 (095) 937-55-13.

Galleryof Our products