Profile and accessories

The frame need connecting and mounting components that allow to build interior partitions, ceilings and other drywall construction.

This means that you will need connectors, anchor brackets, bracket mounting structure, knitting needles-hooks and other helpers in construction.

We offer hardware items - fasteners for plasterboard profile - used to build any configuration. Production capacity and warehouse stocks allow us to produce components in a wide range of thicknesses, from 0.5 mm to 1.5 mm.



Package to profile

Bystropogon: Area for attachment of the UA profile

The area for attachment of the UA profile is used during installation of the strengthened profile in doorways to connect profiles to each other in the corners of the joint.

Produced in thicknesses:
1.5 mm 90х90х95 profile UA 100;
1.5 mm 70х70х45 profile UA 50;
1.5 mm 90х90х68 profile UA 75;

Bystropogon: the fastener

The suspension is designed for mounting CD profile to the ceiling using the spokes and spring mechanism (butterfly steel 65g ).

Produced in thicknesses: 0.7 mm; 0.9 mm

Bystropogon: double Spring "Butterfly"

Used complete with hook and needle to connect the two levels of ceiling frame. Used for lengthening, alignment of the frame of the plane and level.

Produced in thicknesses: 0.8 mm (steel 65g)

Terminal loop-hook

Designed for installation of suspended ceilings.

Produced in thicknesses: 125 mm; 250 mm; 375 mm; 500 mm; 750 mm; 1000 mm; 2000 mm; 3000 mm

Brackets and connectors: CD-in connector

Suitable for increasing the length of the profile CD. Connection profiles is done by setting the CD connector on the inside at the junction of two CD profiles.

Produced in thicknesses: 0.4 mm; 0.6 mm; 0.4 mm light weight (for a profile CD of 48)

Brackets and connectors: Side CD connector

Used for connecting CD 60 profile right angle in a single-tier designs.

Produced in thicknesses: 0.7 mm

Brackets and connectors: the Connector is a sibling of "Crab"

Christoopher necessary for the connection of CD profiles, in the same level recorded in the perpendicular direction. On each side of the crab there are clips with holes for attaching to shelves profiles. Crab is an indispensable element when mounting the suspended ceiling, especially for big ceilings of irregular shape.

Produced in thicknesses: 0.5 mm; 0.6 mm; 0.7 mm; 0.8 mm; 0.9 mm; 1.0 mm; 0.65 light weight (for a profile CD of 48)

Brackets and connectors: the Connector duplex

Designed for connecting CD 60 profile at different levels in mutually perpendicular directions.

Produced in thicknesses: 0.7 mm; 0.8 mm; 0.9 mm; 0.65 light weight (for a profile CD of 48)

U-shaped brackets: U-shaped Bracket 75 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 0.5 mm; 0.6 mm; 0.7 mm; 0.8 mm; 0.65 lightweight

U-shaped brackets: U-shaped Bracket 117 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 0.5 mm; 0.6 mm; 0.7 mm; 0.8 mm; 0.65 lightweight

U-shaped brackets: U-shaped Bracket 170 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 0.6 mm; 0.7 mm; 0.9 mm

U-shaped brackets: U-shaped Bracket 250 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 0.6 mm; 0.7 mm; 0.8 mm; 0.9 mm; 1.0 mm

U-shaped brackets: U-shaped Bracket 350 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 0.7 mm; 1.2 mm; 1.5 mm

U-shaped brackets: U-shaped Bracket 470 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 0.9 mm; 1.1 mm; 1.5 mm

U-shaped brackets: U-shaped Bracket 650 (direct suspension)

Clip is used for fastening a ceiling profile CD 60 to the carrier-based and allows you to adjust the clearance between the supporting Foundation and drywall construction. After the profiles in the design position, the protruding ends of the staples are folded or cut off.

Produced in thicknesses: 1.1 mm; 1.3 mm; 1.5 mm
Galleryof Our products